20
Getting Ready
Turning the Power On
Once everything is properly connected, be sure to follow
the procedure below to turn on their power. If you turn on
equipment in the wrong order, you risk causing malfunction or
equipment failure.
1.
Minimize the volume of this unit.
Also completely turn down the volume of any connected
external devices.
2.
Press the [L] switch.
The unit is turned on, and the display’s backlighting comes on.
ON
OFF
3.
Turn on the power to connected external
devices.
4.
Adjust the volume of the connected external
devices.
5.
Adjust the volume of this unit.
Turning the Power Off
1.
Minimize the volume of this unit.
Also completely turn down the volume of any connected
external devices.
2.
Turn off the power of the connected external
devices.
3.
Press the [L] switch.
The unit is turned off.
NOTE
5 Before turning the unit on/off, always be sure to turn the volume down.
Even with the volume turned down, you might hear some sound when
switching the unit on/off. However, this is normal and does not indicate
a malfunction.
5 If you need to turn off the power completely, first turn off the unit, then
unplug the power cord from the power outlet.
Making the Power Automatically Turn
off After a Time
(Auto Off )
The power to this unit will be turned off automatically after a
predetermined amount of time has passed since it was last used
for playing music, or its buttons or controls were operated (Auto
Off function).
If you do not want the power to be turned off automatically,
disengage the Auto Off function.
NOTE
5 Unsaved data is lost when the power turns off. Any data that you want
to keep must be saved in advance.
5 To restore power, turn the power on again.
Changing the Auto Off Setting
1.
Press the [MENU] button.
The MENU screen appears.
2.
Touch <SYSTEM>.
The SYSTEM screen appears.
3.
Touch <GENERAL>.
4.
Select “Auto Off” and change the setting.
Parameter Value Explanation
Auto Off
OFF The power will not turn off automatically.
30min
The power will automatically turn off if no
operation is performed for 30 minutes.
240min
(default)
The power will automatically turn off if no
operation is performed for 240 minutes
(four hours).
5.
If you want to store the auto-off setting, press
the [WRITE] button in the System screen.
When the save operation is completed, the indication
“Completed” appears.
To Next Page
Loading...
Need help?
General
