61
Recalling Scenes in the Order of Songs (Scene Chain)
Creating a Chain Set
Here’s how to create an original chain set.
1.
Press the [SCENE CHAIN] button.
The SCENE CHAIN screen appears.
2.
Touch the <CHAIN SET> name to switch to an
empty chain set.
3.
Touch <EDIT>.
The SCENE CHAIN EDIT screen appears.
4.
Touch <Select Scene>.
The SCENE SELECT screen appears.
Menu Explanation
[E1] knob Switches the scene bank.
[E5] CANCEL Cancels.
[E6] OK Confirms the selected scene.
5.
Highlight the scene that you want to register.
6.
Select [E6] OK to confirm the selected scene.
You return to the SCENE CHAIN EDIT screen.
Note that the selected scene is registered as the first scene.
If you want to re-select a different scene for the registered
position, you can touch <Select Scene> from this state, and re-
select the scene.
7.
To register the second scene, touch the box
that contains the word <Next>.
The position to be registered moves one place to the right, and
the Next box is highlighted.
8.
Repeat steps 4–6 to register the necessary
scenes.
Scenes are registered consecutively from the left edge toward
the right. Register as many scenes as necessary. Up to 512 scenes
can be registered in a chain set.
9.
If you want to edit the name of the chain set,
touch <RENAME> and edit the name.
When you have edited the name, select [E6] OK to close the
window.
10.
The chain set is saved, and you return to the SCENE CHAIN
screen.
NOTE
When you save, the data previously located in the save-destination is
overwritten.
To save the scene, touch <WRITE>.
To Next Page
Loading...
Need help?
General
