Roland FANTOM Series User Manual

39
Simultaneously Modifying the Volume of Multiple Zones
(Motional Pad)
Using the Motional Pad
The motional pad function lets you simultaneously modify the
volume of four zones by dragging in the screen. By using the
motional pad function, you can produce diverse tonal changes
with a single finger.
MEMO
5 Motional pad settings are saved in the scene.
5 By holding down the [SHIFT] button and pressing the [MOTIONAL PAD]
button, you can access the MOTIONAL PAD screen without affecting the
motional pad on/off status.
1.
Press the [MOTIONAL PAD] button.
The [MOTIONAL PAD] button is lit, and the MOTIONAL PAD
screen appears.
The numbers of the zones being used with the motional pad
function are shown in the zone number areas at the four corners
of the screen. If an applicable zone is off, press the ZONE INT/EXT
button [1]–[8] to turn the zone on.
Pointer
Zone Number
Zone Number
Menu Explanation
<EDIT> Moves to the edit screen.
<MOTIONAL PAD>
Switches the motional pad function on/off in the
same way as the [MOTIONAL PAD] button.
<AUTO> If this is on, the pointer moves automatically.
<HOLD>
If this is on, the most recent pointer position is held
when you take your finger off the screen. If this is
off, the pointer position is reset when you take your
finger off the screen.
[EXIT] button Returns to the previous screen.
2.
While holding down a key, drag the circle
(pointer) in the center of the screen to move it.
The volume balance of the four zones changes according to the position of the
pointer, and the sound changes in real time.
Editing the Motional Pad Settings
In the MOTIONAL PAD screen, you can change the assigned
zones and switch tones.
Changing the Assigned Zones
1.
Press the [MOTIONAL PAD] button.
The MOTIONAL PAD screen appears.
2.
Touch one of the <ZONE> areas located in the
four corners of the screen.
Area1
Area3
Area2
Area4
The MOTIONAL PAD ZONE SELECT screen appears.
3.
Touch the number of the zone that you want
to assign.
The zone assignment is changed, and you return to the
MOTIONAL PAD screen.
Switching the Tone Assigned to a Zone
1.
Press the [MOTIONAL PAD] button.
The MOTIONAL PAD screen appears.
2.
Touch one of the tone names in the areas
located in the four corners of the screen.
The TONE LIST screen appears.
3.
Select a tone, and then select [E6] OK.

Roland FANTOM Series Specifications

General

Brand	Roland
Model	FANTOM Series
Category	Synthesizer
Language	English