22
Connecting to Your Computer/MIDI Keyboard
Connecting Another MIDI Sound Source
to the SC-8850
■ Making Connections
Use a MIDI cable (sold separately) to connect the SC-8850’s MIDI OUT connector to
the MIDI IN connector of the other MIDI sound source.
When the COMPUTER switch is set to [SERIAL (PC, Mac)] or [USB]
fig.1-10e
* When connecting via a SERIAL cable, you cannot use MIDI OUT 2.
When the COMPUTER switch is set to [MIDI]
fig.1-11e
* If you connect this unit using MIDI cable, you cannot use the Part C and D.
In order to output MIDI
messages from MIDI OUT
1 and 2, you must make
settings on your computer
to specify the MIDI
message output destina-
tions.
USB
MIDI OUT1
MIDI IN
MIDI IN
SC-8850
MIDI OUT2
SERIAL
MIDI Sound Module 1
MIDI Sound Module 2
Part group A
GM/GS
Sound generator
Part A1 - A16
Part group B
GM/GS
Sound generator
Part B1 - B16
Part group C
GM/GS
Sound generator
Part C1 - C16
Part group D
GM/GS
Sound generator
Part D1 - D16
From the MIDI OUT 1 and
2 connectors, MIDI
messages are sent to the
connected devices. Set the
track’s output port to MIDI
OUT in your sequencing
software, and the messages
will be output from MIDI
OUT and the SC-8850 itself
will not play. This makes it
easy to use the SC-8850 in
combination with other
sound modules. (You
cannot set any one track’s
data to be output simulta-
neously to both the SC-8850
and MIDI OUT, however.)
MIDI IN 2
MIDI IN 1
SERIAL
MIDI OUT 2
SC-8850
MIDI OUT 1
USB
Part group A
GM/GS
Sound generator
Part A1 - A16
Part group B
GM/GS
Sound generator
Part B1 - B16
Part group C
GM/GS
Sound generator
Part C1 - C16
Part group D
GM/GS
Sound generator
Part D1 - D16
Be aware that when the
COMPUTER switch
located on the back of the
SC-8850 is set to MIDI, data
will not be exchanged via
the USB or the Serial
connector.
The SC-8850 does not have
the MIDI THRU function.
To Next Page
Loading...
Need help?
General
