24
Restoring the Factory Settings (Initialize)
Initializing for General MIDI/GS Format
Here we will also explain the Initialize procedure that you will use when you need
to initialize the SC-8850 to the basic General MIDI/GS settings.
At the beginning of General MIDI/GS music files, there is data that directs the sound
generator to initialize itself (GM1 System On, GM2 System On, or GS Reset p.152).
This means that when you play back music files from the beginning, initialization
takes place automatically, so there is no need for you to do it using the panel buttons.
Initialize for GS (GS Reset)
1
Simultaneously press both the [EDIT] and PART [ ] buttons (UTIL).
2
Press [INIT] ([F3]).
3
Press VAR. [ ] or INST [ ] to move the cursor up and down, and select
Initialize GS.
fig.2-2
4
Press [ENTER].
The display will ask “Initialize Sure?”
5
To initialize, press [ENTER].
To quit without initializing, press [EXIT].
Shortcut Keys
You can easily initialize the settings of theSC-8850 using the [SHIFT] button.
1
While holding down [SHIFT], press PART [].
The display will ask “Initialize Sure?”
2
To initialize, press [ENTER].
To quit without initializing, press [EXIT].
Even if the SC-8850 is
initialized for General
MIDI/GS, the System
parameter settings (p.62)
will not be affected.
Cursor refers to the pointer
that indicates the currently
selected parameter etc. For
example if you select a
certain parameter, the
cursor will move to that
parameter, and the
parameter will be
highlighted.
To Next Page
Loading...
Need help?
General
