Sanyo PLC XU115 - XGA LCD Projector User Manual

30
Choose either Computer 1 (Analog) or Computer 2 by
pressing the INPUT button on the top control or press the
COMPUTERbuttonontheremotecontrol.
Beforeusing these buttons,correctinput sourceshouldbe
selectedthroughMenuoperationasdescribedbelow.
Press the MENU button to display the On-Screen
Menu. Use the Point ◄► buttons to move the red
framepointertotheInputMenuicon.
1
Input Menu
Use the Point ▲▼ buttons to move the red arrow
pointer toeither Computer 1 (Analog) or Computer 2,
andthenpresstheSELECTbutton.
2
When selecting Computer 1 (Analog), RGB input
sourcewillbeselecteddirectly.
When selecting Computer 2, the Source Select Menu
appears.MovethepointertoRGBandthenpressthe
SELECTbutton.
3
Computer 1 (Analog)
Video
Computer 2
Input Source Selection (RGB: Computer 1 (Analog)/Computer 2 )
Computer Input
Move the pointer (red
arrow) to Computer 1
(Analog)andpressthe
SELECTbutton.
InputMenuicon
COMPUTER button
Notes:
 •Wired and Wireless are for the Network function. See
owner’smanual“NetworkSet-upandOperation”.
 •WhentheInputSearchfunctionissetto“On1”or“On2”,
theinputsignalwillbesearchedautomatically(p.51).
Move the pointer
(redarrow)toRGB.
Move the pointer (red
arrow) to Computer 2
andpresstheSELECT
button.
InputMenuicon
Computer
2
Wired
Top Control
INPUT button
Computer 1 (Digital)
Remote Control
Computer 1 (Analog)
Computer 2
Computer 1 (Digital)
Direct Operation
Menu Operation
Input Menu
Wireless

Sanyo PLC XU115 - XGA LCD Projector Specifications

General

Brand	Sanyo
Model	PLC XU115 - XGA LCD Projector
Category	Projector
Language	English