7
Safety Instructions
Openingsinthe cabinetareprovidedfor ventilation.To
ensurereliableoperationoftheproductandtoprotectit
from overheating, these openings must not be blocked
orcovered.
CAUTION
Hotairisexhaustedfromtheexhaustvent.Whenusing
or installing the projector, the following precautions
shouldbetaken.
–Donotputanyflammableobjectorspraycannearthe
projector,hotairisexhaustedfromtheairvents.
–Keeptheexhaustventatleast3’(1m)awayfromany
objects.
–Do not touch a peripheral part of the exhaust vent,
especiallyscrewsandmetallicparts.Theseareaswill
becomehotwhiletheprojectorisbeingused.
–Donotputanythingonthecabinet.Objectsputonthe
cabinetwillnotonlygetdamagedbutalsomaycause
firehazardbyheat.
Cooling fans are provided to cool down the projector.
The fans’ running speed is changed according to the
temperatureinsidetheprojector.
CAUTION IN CARRYING OR TRANSPORTING
THE PROJECTOR
–Donotdroporbumptheprojector,otherwisedamages
ormalfunctionsmayresult.
–Whencarryingtheprojector,useasuitablecarrying
case.
–Donot transport theprojectorbycourier or anyother
transportserviceinanunsuitabletransportcase.This
may cause damage to the projector. For information
abouttransportingtheprojectorbycourieroranyother
transportservice,consultyourdealer.
–Donotputtheprojectorinacasebeforetheprojector
iscooledenough.
Moving the Projector
When moving the projector, replace the Lens Cap and
retract adjustable feet to prevent damage to the lens
andcabinet.
Whentheprojectorisnotinuseforanextendedperiod,
putit into thesuppliedcarrying casewiththe lens side
up.
CAUTION
The carrying case (supplied) is intended for protection
against dust and scratches on surface of the cabinet,
and it is not designed to protect an appliance from
externalforces.Donottransporttheprojectorbycourier
or any other transport service with this case, otherwise
the projector can be damaged. When handling the
projector,donotdrop,bump,subjectittostrongforces,
orputotherthingsonthecabinet.
AirIntakeVent
AirIntakeVent
ExhaustVent
(Hotairexhaust)
AirIntakeVent
Air Circulation
AirIntakeVent