General 02.00
© Siemens AG 1998 All rights reserved
These Operating Insructions are available in the following languages:
Language German French Spanish Italian
Order No. 6RX1700-0AD00 6RX1700-0AD77 6RX1700-0AD78 6RX1700-0AD72
Converter software version:
As these Operating Instructions went to print, SIMOREG DC Master converters were being delivered from the
factory with software version 1.8 installed.
These Operating Instructions also apply to other software versions.
Earlier software versions: Some parameters described in this document might not be stored in the software
(i.e. the corresponding functionality is not available on the converter) or some
parameters will have a restricted setting range. If this is the case, however,
appropriate reference to this status will be made in the Parameter List.
Later software versions: Additional parameters might be available on the SIMOREG DC Master (i.e. extra
functions might be available which are not described in these Operating
Instructions) or some parameters might have an extended setting range. In this
case, leave the relevant parameters at their factory setting, or do not set any
parameter values which are not described in these Instructions !
The latest software version is available at the following Internet site:
http://www.siemens.at/eww/a&d/updates (password for access: "simo1reg”).
The reproduction, transmission or use of this document or contents is
not permitted without express written authority. Offenders will be liable
for damages. All rights, including rights created by patent grant or
registration of a utility model or design, are reserved.
We have checked that the contents of this publication agree with the
hardware and software described herein. Nonetheless, differences
might exist and therefore we cannot guarantee that they are completely
identical. The information given in this publication is reviewed at regular
intervals and any corrections that might be necessary are made in the
subsequent printings. Suggestions for improvement are welcome at all
times.
SIMOREG ® is a registered trademark of Siemens
To Next Page
Loading...
Need help?
General
