The mixed operation of a PM240-2 with booksize modules and/or PM340 blocksize modules
on
a CU320-2/D4x5-2/CX32-2 is possible as of SINAMICS V4.7 HF12 or SIMOTION V4.4 HF6
(SINAMICS Integrated V4.7 HF12).
Note
You
will find detailed information on components of the SINAMICS S110/S120 product family
in the SINAMICS S110/S120 manuals.
It is possible that older DRIVE‑CLiQ components can no longer be used with SIMOTION
D4x5‑2/CX32‑2. You will find detailed information on this topic in the SIMOTION D4x5-2
Commissioning and Hardware Installation Manual at "Migration of D4x5 to D4x5‑2" in Section
"Permissible combinations".
Optional components
The
functionality of the D4x5‑2 Control Unit can be expanded with the following components:
Table 2-7 Optional components
Component Function D4x5-2 DP D4x5-2 DP/PN
CBE30-2 Ethernet
communication board
Communication via PROFINET IO with
IRT and PROFINET IO with RT
No Yes
TB30 Terminal Board Terminal expansion, i.e. additional ana‐
log and digital I/Os
Yes Yes
The components are plugged into the option slot of the Control Unit.
Description
2.2 System components
SIMOTION D4x5-2
30 Commissioning and Hardware Installation Manual, 03/2018, A5E33441636B
To Next Page
Loading...
Need help?
General
