Siemens SIMOTION D4x5-2 User Manual

9.2 Diagnostic data and non-volatile SIMOTION data
9.2.1
Overview
With simple operation actions (e.g. by setting the switch position) and without the need for the
SCOUT engineering system, you can:
● Back up diagnostic data, including non-volatile SIMOTION data (retain data) to the
CompactFlash card; for information, see Section Backing up diagnostics data and non-
volatile SIMOTION data (Page 396).
● Back up HTML pages (including the most up-to-date content) to the CompactFlash card
for diagnostic purposes; for information, see Section Diagnostics via HTML pages
(Page 403).
● Restore backed-up non-volatile SIMOTION data (retain data); for information, see Section
Deleting/restoring non-volatile SIMOTION data (Page 404).
9.2.2 Backup of diagnostic data and non-volatile SIMOTION data
9.2.2.1 Diagnostic data
Following a fault on a SIMOTION device, diagnostic data (e.g. diagnostic buffer content, up-
to-date content of HTML pages, etc.) can provide important information on the cause of the
fault. For this purpose, data can be backed up to the CF card via a "simple operator action"
(e.g. via service selector switch or DIAG button on the D4x5‑2).
You then have the following options for the diagnostic data:
● Fetching them from the CF card using a card reader
● You can load it with the SIMOTION IT web server or by FTP
You can also use them for diagnostic purposes or provide Technical Support with them for
evaluation purposes.
Diagnostics
9.2 Diagnostic data and non-volatile SIMOTION data
SIMOTION D4x5-2
396 Commissioning and Hardware Installation Manual, 03/2018, A5E33441636B

Siemens SIMOTION D4x5-2 Specifications

General

Brand	Siemens
Model	SIMOTION D4x5-2
Category	Control Unit
Language	English