5.14 Starting communication via PROFIsafe
Starting communication via PROFIsafe
When you connect the converter to the higher-level control system (F-CPU) via the fieldbus
for the first time, the central control system sends the PROFIsafe configuration to the converter.
After the configuration data have been received in the converter, PROFIsafecommunication
starts.
The converter only monitors the communication to the F-CPU after the configuration data have
been received from the central control system.
Commissioning
5.14 Starting communication via PROFIsafe
Safety Integrated - SINAMICS G110M, G120, G120C, G120D and SIMATIC ET 200pro FC-2
Function Manual, 01/2017, FW V4.7 SP6, A5E34261271B AD 205
To Next Page
General
