Siemens SIPROCESS GA700 Quick Start

Quick Start
Compact Operating Instructions, 05/2018, A5E31805656-06
11
Safety instructions
2
2.1
Requirement for safe use
In terms of safety, this device left the factory in perfect condition. In order to maintain this
status and to ensure safe operation of the device, observe these compact operating
instructions and all the information relevant to safety.
Observe the information and symbols on the device. Do not remove any information or
symbols from the device. Always keep the information and symbols in a completely legible
state and renew them, if required.
2.1.1
Warning symbols on the device
Symbol
Description
Consult operating instructions
Hot surface
Dangerous electrical voltage
2.1.2
Laws and directives
Observe the test certification, provisions and laws applicable in your country in the currently
valid version during connection, assembly and operation. These include, for example:
● National Electrical Code (NEC - NFPA 70) (USA)
● Canadian Electrical Code (CEC) (Canada)
Additional provisions for applications in hazardous areas are, for example:
● IEC 60079-14 (international)
● EN 60079-14 (EU)
Additional information is available at:
Certificate (Page 137)

Siemens SIPROCESS GA700 Specifications

General

Brand	Siemens
Model	SIPROCESS GA700
Category	Measuring Instruments
Language	English