Quick Start
Compact Operating Instructions, 05/2018, A5E31805656-06
117
Hot surfaces resulting from hot sample gases and heated devices
Danger of burns resulting from surface temperatures above 70 °C (155 °F)
After being switched off, the device and its parts are still very hot. Touching can result in
skin burns.
• Begin the maintenance / shutting down once the device has cooled off.
• Take appropriate protective measures, for example contact protection.
The following dangers may result through incorrect disassembly:
- Injury through electric shock
- Danger through emerging media when connected to the process
- Danger of explosion in hazardous area
Observe the following for correct disassembly:
• Before starting work, ensure that the power supply and pressure supply are
disconnected and hot device surfaces have cooled off.
• If the device contains dangerous process media, empty the device prior to disassembly.
Make sure that no media are released which are environmentally hazardous.
• Secure the remaining connections so that no damage can result if the process is start
ed
uni
ntentionally.
To Next Page
Loading...
Need help?
General
