Functions
6-142 7SJ62 Manual
C53000-G1140-C121-1
6.14.2.2 Information List for Automatic Reclosing
F# LCD-Text Explanation Ordering Code
7SJ62**–
**A**–
**M**–
**B**–
**N**–
**C**–
**P**–
2781 79 OFF 79 Auto recloser is switched OFF X X X
2782 79 ON 79 Auto recloser is switched ON X X X
2784 CB is NOT ready Circuit breaker is NOT ready X X X
2785 79 Dyn Block 79 – Auto-reclose is dynamically BLOCKED X X X
2801 79 in progress 79 Reclosing is in progress X X X
2851 79 Close 79 – Close command X X X
2862 79 Successful 79 – cycle successful X X X
2863 79 Lockout 79 – Lockout X X X
2869 TRIP Gnd Fault TRIP Ground fault X X X
2870 TRIP Ph Fault TRIP Phase fault X X X
2876 79 STEP 79–A/R attempt step X X X
2878 79 L–N Sequence 79–A/R single phase reclosing sequence X X X
2879 79 L–L Sequence 79–A/R multi-phase reclosing sequence X X X
2883 ZSC active Zone sequencing is active - X X
2884 ZSC ON Zone sequencing coordination is switched ON - X X
2885 ZSC OFF Zone sequencing coordination is switched OFF - X X
0127 79 ON/OFF 79 ON/OFF (via system port) X X X
2701 >79 ON >79 ON X X X
2702 >79 OFF >79 OFF X X X
2703 >BLOCK 79 >BLOCK 79 Auto recloser X X X
2705 >79 T WAIT >79 T wait (coordination control) - X X
2730 >CB ready >Circuit breaker ready X X -
2715 >79 TRIP 1p >79 Ext. 1pole TRIP for internal A/R X X X
2716 >79 TRIP 3p >79 Ext. 3pole TRIP for internal A/R X X X
2722 >ZSC ON >Switch zone sequence coordination ON - X X
2723 >ZSC OFF >Switch zone sequence coordination OFF - X X
4601 >52-a >52-a contact (OPEN, if breaker is open) X X X
4602 >52-b >52-b contact (OPEN, if breaker is closed) X X X
356 >Manual Close >Manual close signal X X X
www . ElectricalPartManuals . com
To Next Page
Loading...
Need help?
General