Siemens SIPROTEC 7SJ62 Instruction Manual

Operators Tools
7-14 7SJ62 Manual
C53000-G1140-C121-1
Figure 7-17 Setting Statistics Values from the Device Front
From PC with
DIGSI
®
4
In the 6WDWLVWLF window, mark the value that is to be set. With the
right mouse but-
ton, open a context menu and select 6HW. See figure 7-18. After the password for in-
dividual settings is entered, the previous value in the window can be overwritten.
Figure 7-18 Digsi
®
4 Setting Statistic Values
7.1.2.3 Setting Limit Values for the Statistics Counters
From the
Device Front
In the $1181&,$7,21 sub-menu, use the key to select the sub-item 6HW5HVHW,
and enter this sub-menu. Use the key to select the item 6HW3RLQW6WDW and
move with the key to set the Operating Hours Counter. See Figure 7-19. Then
press the key. After the password for individual settings is entered, the cursor
blinks and the counter value is highlighted with a box. The value can be overwritten
using the number keys. Confirm the change using the key.
Figure 7-19 Setting the Limit Value, Example on the Front Display
The message “$UH\RXVXUH"” appears in the display, with the response “<HV” as
the default. Confirm with the key if a change to the limit value is really desired. If
a change to the limit value is not wanted, press the key so that the response “1R”
is higlighted, and confirm with the key. Before confirming with the key, the
and keys can be used to toggle between “<HV” and “1R.”
2SHU+UV 
0D[ 2147483648
ENTERENTER
2S+RXUV 

67$7,67,&

RI75,3V 
2S+RXUV !KRXU
:
ENTER
ENTER
2S+UV!K
ENTER
6(732,1767$7

2S+UV!!K
ENTER
ENTER ENTER
www . ElectricalPartManuals . com

Siemens SIPROTEC 7SJ62 Specifications

General

Brand	Siemens
Model	SIPROTEC 7SJ62
Category	Relays
Language	English