5-17SJ62 Manual
C53000-G1140-C121-1
Configuration 5
Configuration is the process of customizing the relay for the intended application.
To accomplish this, the following questions must be answered:
• Which functions are needed?
• Which data and measured quantities need to be retrieved via which inputs?
• Which control actions need to be issued via which outputs?
• Which user-definable functions need to be performed in CFC (Continuous Function
Chart)?
• What should the displays look like?
• Which interfaces are to be used?
• Which time source is to be used to synchronize the internal clock?
This chapter describes in details how to configure the 7SJ62.
5.1 Configuration of Functions 5-2
5.2 Configuration of Information, Meaured Values, and Commands 5-6
5.3 Creating User Defined Functions with CFC 5-32
5.4 Establishing a Default Display 5-40
5.5 Serial Ports 5-41
5.6 Date and Time Stamping 5-44
www . ElectricalPartManuals . com
To Next Page
Loading...
Need help?
General