Siemens SIPROTEC 7SJ62 Instruction Manual

Functions
6-1617SJ62 Manual
C53000-G1140-C121-1
1
) After three unsuccessful restart attempts, the device will go out of service.
2
) Protection and control function are blocked, HMI might be still accessible.
Current Summation
CT Error) Message „)DLOXUHΣ,“
(FNo. 162)
as masked
Current Symmetry
CT Error Message „)DLO,EDODQFH“
(FNo. 163)
as masked
Voltage Symmetry
VT Error Message „)DLO9EDODQFH“
(FNo. 167)
as masked
Voltage Phase
Sequence
External (connections or
power system)
Message „)DLO3K6HT9“
(FNo. 176)
as masked
Current Phase
Sequence
External (connections or
power system)
Message „)DLO3K6HT,“
(FNo. 175)
as masked
Fuse–Failure–
Monitor
External (VTs, fuses, or
control cable)
Message „VT )XVH)DLOXUH“
(FNo. 6575)
as masked
Trip Circuit
Monitoring
External (open trip coil or
blown fuses)
Message „)DLO7ULSFLU“
(FNo. 6865)
as masked
Table 6-6 Summary of the Device Malfunction Responses
Monitoring Possible Cause Malfunction Re-
sponse
Message Output
www . ElectricalPartManuals . com

Siemens SIPROTEC 7SJ62 Specifications

General

Brand	Siemens
Model	SIPROTEC 7SJ62
Category	Relays
Language	English