Siemens SIPROTEC 7SJ62 Instruction Manual

Appendix
A-18 7SJ62 Manual
C53000-G1140-C121-1
1102 I PRIMARY OP. 10..50000 A 100 A Primary Operating Current
1103 RG/RL Ratio -0.33..7.00 1.00 RG/RL - Ratio of Gnd to Line Resi-
stance
1104 XG/XL Ratio -0.33..7.00 1.00 XG/XL - Ratio of Gnd to Line Reac-
tance
1105 x’ 0.002..2.000 Ohm /
mile
0.200 Ohm / mile x’ - Line Reactance per length unit
1106 x’ 0.001..1.243 Ohm / km 0.124 Ohm / km x’ - Line Reactance per length unit
1107 I MOTOR START 3.00..50.00 A 12.50 A Motor Start Current (Block 49, Start
48)
1201 FCT 50/51 ON
OFF
ON 50, 51 Phase Time Overcurrent
1202 50-2 PICKUP 0.50..175.00 A 10.00 A 50-2 Pickup
1203 50-2 DELAY 0.00..60.00 sec 0.00 sec 50-2 Time Delay
1204 50-1 PICKUP 0.50..175.00 A 5.00 A 50-1 Pickup
1205 50-1 DELAY 0.00..60.00 sec 0.50 sec 50-1 Time Delay
1207 51 PICKUP 0.50..20.00 A 5.00 A 51 Pickup
1208 51 TIME DIAL 0.05..3.20 sec 0.50 sec 51 Time Dial (IEC)
1209 51 TIME DIAL 0.50..15.00 5.00 51 Time Dial (ANSI)
1210 51 Drop-out Instantaneous
Disk Emulation
Disk Emulation Drop-out characteristic
1211 51 IEC CURVE Normal Inverse
Very Inverse
Extremely Inverse
Long Inverse
Normal Inverse IEC Curve
1212 51 ANSI CURVE Very Inverse
Inverse
Short Inverse
Long Inverse
Moderately Inverse
Extremely Inverse
Definite Inverse
Very Inverse ANSI Curve
1213 MANUAL CLOSE 50-2 instantaneously
50 -1 instantaneously
51 instantaneously
Inactive
50-2 instantane-
ously
Manual Close Mode
1214 50-2 active Always
with 79 active
Always 50-2 active
1230 51/51N 51/51N
1231 MofPU Res T/Tp Multiple of Pickup <-> T/Tp
1301 FCT 50N/51N ON
OFF
ON 50N, 51N Ground Time Overcurrent
1302 50N-2 PICKUP 0.25..175.00 A 2.50 A 50N-2 Pickup
1303 50N-2 DELAY 0.00..60.00 sec 0.10 sec 50N-2 Time Delay
1304 50N-1 PICKUP 0.25..175.00 A 1.00 A 50N-1 Pickup
Addr. Setting Title Setting Options Default Setting Comments
www . ElectricalPartManuals . com

Siemens SIPROTEC 7SJ62 Specifications

General

Brand	Siemens
Model	SIPROTEC 7SJ62
Category	Relays
Language	English