Installing/mounting
4.1 Basic safety information
SITRANS LR250 (PROFIBUS PA)
22 Operating Instructions, 08/2014, A5E32221386-AC
Danger of explosion in hazardous areas as result of open cable inlet or incorrect conduit
system.
• In the case of a conduit system, mount a spark barrier at a defined distance from the
device input. Observe national regulations and the requirements stated in the relevant
approvals.
Danger to personnel, system and environment will result from improper disassembly.
• Never attempt to loosen, remove, or disassemble process connection while vessel
contents are under pressure.
Danger to personnel, system and environment can result from improper installation.
• Improper installation may result in loss of process pressure.
Exceeded maximum permissible operating pressure
Danger of injury or poisoning.
The maximum permissible operating pressure depends on the device version. The device
can be damaged if the operating pressure is exceeded. Hot, toxic and corrosive process
media could be released.
• Make sure that the device is suitable for the maximum permissible operating pressure of
your system.
To Next Page
Loading...
Need help?
General
