Siemens Sitrans LR250 User Manual

Commissioning
6.3 Application examples
SITRANS LR250 (PROFIBUS PA)
Operating Instructions, 08/2014, A5E32221386-AC
67
6.2.3.4
Device address
Note
See
Master Reset (Page 96) to reset Device Address to 126.
The unique address of the device on the network (also called PROFIBUS address).
Values 0 - 126. Default: 126
1. In PROGRAM mode, navigate to:
Level Meter > (5.)
Communication > (5.1.)
Device Address
.
2. Press
RIGHT arrow
,
RIGHT arrow
, to open parameter view and enable Edit mode.
3. If required, key in a new value and press
RIGHT arrow
to accept it. The LCD displays the
new value.
4. Press
Mode
to return to Measurement mode.
6.3
Application examples
Note
In the
applications illustrated below, values are for example purposes only.
You can use these examples as setup references. Enter the values in the parameter tables to
select the corresponding functions.
Configure the basic settings using the Quick Start wizard parameters. (These parameters are
inter-related, and changes take effect only after you select
YES
to apply changes in the final
step.)
In each example, after performing a Quick Start, navigate to the other required parameters either
via the handheld programmer or via SIMATIC PDM and enter the appropriate values.

Siemens Sitrans LR250 Specifications

General

Brand	Siemens
Model	Sitrans LR250
Category	Transmitter
Language	English