Siemens Sitrans LR250 User Manual

Commissioning
6.2 Operating via the handheld programmer
SITRANS LR250 (PROFIBUS PA)
58 Operating Instructions, 08/2014, A5E32221386-AC
6.2.3
Programming
Note
•
While the device is in PROGRAM mode the output remains active and continues to
respond to changes in the device.
•
The device automatically returns to Measurement mode after a period of inactivity in
PROGRAM mode (between 15 seconds and 2 minutes, depending on the menu level).
Change parameter settings and set operating conditions to suit your specific application. For
remote operation see Operating via SIMATIC PDM (Page 75).
Parameters menu
Note
For the complete list of parameters with instructions, see
Parameter Reference (Page 107).
Parameters are identified by name and organized into function groups. See LCD menu structure
(Page 285).
1. QUICK START
2. SETUP
2.1. IDENTIFICATION
............
2.4. LINEARIZATION
2.4.1. VOLUME
2.4.1.1. VESSEL SHAPE

Siemens Sitrans LR250 Specifications

General

Brand	Siemens
Model	Sitrans LR250
Category	Transmitter
Language	English