Calibration procedure (Page 67)
DR 10 load cell parameters (Page 77)
DR 14 SIMATIC interface parameters (Page 81)
Communication in SIMATIC S7-300/400/1200/1500 (Page 103)
DR 6 limit value settings (Page 73)
Automatic calibration (without calibration weight) (Page 50)
1.3 Product compatibility
The following table describes compatibility between manual edition, device revision, and the
engineering system.
Manual edition
Comment Device revision Engineering system
08/2019 New characteristics FW: 1.4.0
HW: FS 1 or higher
STEP 7 TIA Portal V15.1 or higher
09/2018 New characteristics FW: 1.3.0
HW: FS 1 or higher
STEP 7 TIA Portal V14 or higher
1.4 Checking the consignment
1. Check the packaging and the delivered items for visible damages.
2. Report any claims for damages immediately to the shipping company.
3. Retain damaged parts for clarification.
4. Check the scope of delivery by comparing your order to the shipping documents for
correctness and completeness.
WARNING
Using a damaged or incomplete device
Risk of explosion in hazardous areas.
● Do not use damaged or incomplete devices.
1.5 Security information
Siemens provides products and solutions with industrial security functions that support the
secure operation of plants, systems, machines and networks.
In order to protect plants, systems, machines and networks against cyber threats, it is
necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial
security concept. Siemens’ products and solutions constitute one element of such a concept.
Introduction
1.5 Security information
SIWAREX WP321
10 Operating Instructions, 08/2019, A5E33715669A-AD
To Next Page
Loading...
Need help?
General
