Variable Note Type L Rw Default Min. Max.
Calibration digits
0, 1, 2 (calculated)
(Page 71)
Calibration digits 0
(calculated): Calibra‐
tion digits calculated
in "Automatic Calibra‐
tion"
DINT 4 r ?
Calibration digits 1
(calculated): Calibra‐
tion digits calculated
in "Automatic Calibra‐
tion"
DINT 4 r 0
Calibration digits 2
(calculated): Calibra‐
tion digits calculated
in "Automatic Calibra‐
tion"
DINT 4 r 0
Reserve 1 Reserve INT 2 r 0 - -
Reserve 2 Reserve UINT 2 r 0 - -
Reserve 3 Reserve REAL 4 r 0 - -
8.6.1 Calibration digits 0, 1, 2 (calculated)
The calculation is based on the parameters from DR 3 and DR 10 identified by bold font and is
activated by the command no. 82.
8.7 DR 5 zeroing memory
Data record DR 5 displays the current values in the tare memory and the zeroing memory.
Procedure
● Check all parameters
● Transfer the data record to the scale
Table 8-3 Assignment of data record 5
Variable Note Type L Rw Default Min. Max.
Data record
number
Contains no. of data re‐
cord
UINT 2 r 5 - -
Length Data record length infor‐
mation
UINT 2 r 40 - -
Application Information about which
application the DR be‐
longs to
UINT 2 r 201 - -
Version identifi‐
er
Information on the current
data record version
UINT 2 r 1 1 65635
Scale parameters and functions
8.7 DR 5 zeroing memory
SIWAREX WP321
Operating Instructions, 08/2019, A5E33715669A-AD 71
To Next Page
Loading...
Need help?
General
