Siemens SIWAREX WP321 User Manual

8.17.1 Content of main display as ACII string
The following values can be displayed:
Variable Command
Switch on increased resolution 701
Current tare weight 705
Gross/net display 710
Net process value 714
Gross process value 715
Serial number 871
Firmware version 875
Below are some display examples. Commands are used to toggle the display values.
The values to be displayed are suppressed if a fault is present.
Value designation Blank Display value Unit of weight
(from DR 3)
N: Net, B/G: Gross,
T: Tare, pT: Preset tare,
S: Sum, ...
Weight
(Tare ≠ 0)
N • • • • • 2 2 0 , 5 0 •kg•
Neg. weight
(Tare = 0)
B • • • • • • - 0 , 0 3 •t••
Weight in increased resolu‐
tion
• • • • • • 1 0 , 0 0 3 HIGH
Operator error B • • • • • • I r r o r ****
Tare display activated (pt) p T • • • • • 5 0 , 5 0 •kg•
Tare display activated T • • • • • • 5 0 , 5 0 •kg•
8.18 DR 70 SIWAREX DB parameter
The parameters which define the response in combination with SIWAREX DB are specified in
data record DR 70.
If SIWAREX DB is not used, the default settings can be accepted.
Table 8-15 Assignment of data record DR 70
Variable Note Data type Length
(bytes)
Rw Default Min. Max.
Data record number [DR_NO] Contains no. of data record USHORT 2 R 70 - -
Length [DR_LEN] Data record length information USHORT 2 R 180 - -
Application [APPL_ID] Information on which applica‐
tion the data record
belongs to
USHORT 2 R 101 - -
Version identifier
[DR_VERSION]
Information on the current data
record version
USHORT 2 r 1 1 65635
Scale parameters and functions
8.18 DR 70 SIWAREX DB parameter
SIWAREX WP321
Operating Instructions, 08/2019, A5E33715669A-AD 91

Siemens SIWAREX WP321 Specifications

General

Brand	Siemens
Model	SIWAREX WP321
Category	Accessories
Language	English