8.8.4 Delay time for limits
If the weight reaches the specified switch value, a delay time (defined in ms) is launched. Once
the delay time is over, the limit switch changes status provided the weight still reaches the
specified switch value.
This delay time applies to the switch-on and switch-off values 1 and 2 and to the switch-on limit
for the empty value. The empty value does not have a switch-off delay.
8.9 DR 9 module information
No entries can be made in data record DR 9. This data record provides information on the inner
workings of the SIWAREX module. This information is used to identify the module at the
manufacturer plant (e.g. in the event of repairs). The entries in the data record are of no
importance to the user for operation.
Table 8-5 Assignment of data record 9
Variable Note Type L Rw Default Min. Max.
Data record
number
Contains no. of data record UINT 2 r 9 - -
Length Data record length infor‐
mation
UINT 2 r 68 - -
Application Information about which
application the DR be‐
longs to
UINT 2 r 201 - -
Version identi‐
fier
Information on the current
data record version
UINT 2 r 1 1 65635
Order number
- header
Maximum and current
string length for the order
number
UBYTE[2] 2 r 16,16 - -
Order number Order number of the mod‐
ule
7MH ..
STRING[16] 16 r "7MH …" - -
Serial number
- header
String header UBYTE[2] 2 r 12,12 - -
Serial number Serial number "
XXX00001"
STRING[12] 12 r " " - -
Firmware type
- header
String header UBYTE[2] 2 r 2.2 - -
Firmware type Reference V - Release
B - Test
etc.
STRING[2] 2 r 'V ' - -
FW version -
1st digit
Version 1. UINT 2 r 1 - -
FW version -
2nd digit
Version 2. UINT 2 r 0 - -
FW version -
3rd digit
Version 3. UINT 2 r 0 - -
Scale parameters and functions
8.9 DR 9 module information
SIWAREX WP321
76 Operating Instructions, 08/2019, A5E33715669A-AD
To Next Page
Loading...
Need help?
General
