S6 Portable Digital Color Doppler Ultrasound System
Service Manual
7.2 Applicable Models
Instructions in this chapter are applicable to the models of S6 series and S6
series.
7.3 Update Files
Two update files, a main file (adata file) and a control file (asecure file),
are sent by the R&D department of SonoScape. Copy them to the root path
of a USB disk or a removable hard dirk drive.
Attention!
The main file and the control file are named as
adata_
*
.
*
.
*
.
*
.tgz and asecure
******
_
*
.
*
.
*
.
*
.tgz
respectively. The four digits (
*
.
*
.
*
.
*
) in the file names
should be identical for the two files and consistent with the
current software version. The six consecutive digits (
******
)
in the asecure file represent a control number. This control
number must be consistent with that on the system to be
upgraded.
Example: For the two files: adata_2.0.0.12.tgz and
asecure200008_2.0.0.12.tgz, 2.0.0.12 stands for the
current software version, 200008 stands for the control num-
ber.
You can find the control number for the system with either of the fol-
lowing two methods:
Method 1:
1. Turn on and start up the system.
2. Press MENU key at the EXAM screen, this will lead you to the system
menu.
3. Select System Information by moving the trackball.
4. Press Set key to enter the system information submenu. The control
number and the current software version number are shown (refer to
Figure 7.1).
P/N: 4720-0034-01A
7-2
To Next Page
Loading...
Need help?
General
