14.2 Visual Symbols
The following symbols may appear on the equipment:
Symbol Description
UL Listed Mark
Certifies that equipment meets requirements and standards of
Underwriters Laboratories (UL). Accompanied by UL listing reference.
FCC Declaration of Conformity
Certifies that electromagnetic interference from device is under limits
approved by Federal Communications Commission.
CE Mark
Certifies that equipment conforms with health, safety, and environmental
production standards for products sold within the European Community.
Protective Earth Ground
Indicates an electrical connection to ground on equipment.
Electric Shock Hazard
Refer to operator manual for further details on electrical hazards associated
with this equipment.
Electrical Power Requirement of Equipment
Refer to operator manual for further information on electrical power and
electrical connection requirements for this equipment.
Hazard (Warning, Caution)
Refer to operator manual for further details on hazards associated with this
equipment.
Date of Manufacture
Accompanied by date of manufacture.
Manufacturer Details
Accompanied by name and address of manufacturer.
Authorized Representative in the European Community
Accompanied by name and address of manufacturer's authorized
representative within the European Community.
Unique Device Identification
The labeling on this equipment adheres to the UDI system labelling as
defined by the FCC.
Table 14.1 Visual Symbols
122 TERMS, DEFINITIONS, AND SYMBOLS
InnoWave Unity & Unity 20 Operator Manual
To Next Page
Loading...
Need help?
General
