Steris InnoWave Unity User Manual

6.3 Wash Cycle Stages — Unity
The stages of the Complete Wash Cycle program are described below. Note: Other wash
cycles may not include all steps described.
Start cycle Confirm loading
Confirm basket is docked in tank and ready to
start wash cycle.
Prewash
Filling Tank fills from cold water inlet.
Flushing
Pulsed lumen flushing.
Draining
Water drains from tank.
Washing
Filling Tank fills from hot and cold water inlets.
Dispensing
Chemical added on reaching minimum tank level.
Heating
Water heats to set point, circulating thru lumens.
Degassing
Ultrasonics pulsed to remove dissolved gases.
Ultrasonics/flushing Alternating ultrasonics and lumen flushing.
Draining Water drains from tank.
Rinsing
Filling Tank fills from cold water inlet.
Flushing
Pulsed lumen flushing.
Draining
Water drains from tank.
Final rinse
Filling Tank fills from cold water inlet.
Flushing
Pulsed lumen flushing.
Draining
Water drains from tank.
Cycle
complete
Confirm Acknowledge cycle completed.
Unload
Unload basket and confirm unloading.
PERFORMING A WASH CYCLE 53
InnoWave Unity & Unity 20 Operator Manual

Steris InnoWave Unity Specifications

General

Brand	Steris
Model	InnoWave Unity
Category	Medical Equipment
Language	English