8.3 Weekly Cleaning and Inspection
1. Perform all daily cleaning and inspection. See
Daily Cleaning and Inspection
on
page67.
2. Make sure that the mains power cable is not trapped, or damaged.
3. Inspect all drainage connections and hoses for leaks, kinks, or damage.
4. Perform a Full Decontamination, See
Performing a Full Decontamination
on
page71.
8.4 Checking the Time and Date Settings
The time and date should be set correctly to ensure the accuracy of wash cycle records,
and should be periodically checked by the operator. There is no automatic provision for
adjusting to daylight saving hours. When the equipment is powered off, an internal battery
maintains the time and date.
1. To view the current time and date setting, from the main menu, touch repeatedly on
or until the clock symbol is centered. The current time and date settings
appear below the clock symbol. The touchscreen buttons below the current time
and date are used to adjust settings.
MAINTENANCE 69
InnoWave Unity & Unity 20 Operator Manual
To Next Page
Loading...
