4. Touch OK on the display to confirm recognition that the wash cycle was aborted.
The tank will be drained of fluids and the display will return to the
Load Instruments
screen when the tank draining is completed.
5. Instruments inside the sonic irrigator must be processed in a new wash cycle.
6.7 Wash Cycle Errors
If an unexpected condition occurs, the sonic irrigator will abort the wash cycle, emit an
audible alarm, and an error message will appear on the display with a reason for the abort.
The cycle log will record an error code, a description of the error, and diagnostic
information.
WARNING
When error occurs during wash cycle, load may be contaminated and require
reprocessing. Review cycle log to establish if wash cycle completed before error. If error
interrupted wash cycle, repeat cycle to reprocess load. If error persists use another unit
or alternative cleaning process (according to facility procedure) and contact equipment
supplier to have unit serviced.
1. When an error occurs, an audible alarm is emitted, and an error code is shown on
the display.
PERFORMING A WASH CYCLE 59
InnoWave Unity & Unity 20 Operator Manual
To Next Page
Loading...
Need help?
General
