Suzuki GSX650F User Manual

Engine Mechanical: 1D-37
2) Check that the push rod slides smoothly when
releasing stopper (1). If it does not slide smoothly,
replace the cam chain tension adjuster with a new
one.
3) Install the cam chain tension adjuster. Refer to
“Engine Top Side Assembly (Page 1D-26)”.
Cam Chain Guide Removal and Installation
B817H21406024
Removal
1) Remove the cylinder head cover. Refer to “Engine
Top Side Disassembly (Page 1D-24)”.
2) Remove the cam chain No.2 guide (1) from the
cylinder head cover.
3) Remove the cylinder head. Refer to “Engine Top
Side Disassembly (Page 1D-24)”.
4) Remove the cam chain No.1 guide (2).
Installation
Install the cam chain guides in the reverse order of
removal.
Cam Chain Guide Inspection
B817H21406025
Inspect the cam chain guide in the following procedures:
1) Remove the cam chain No.1 and No.2 guides. Refer
to “Cam Chain Guide Removal and Installation
(Page 1D-37)”.
2) Check the contacting surface of the cam chain
guide. If it is worn or damaged, replace it with a new
one.
3) Install the cam chain No.1, No.2 guides. Refer to
“Cam Chain Guide Removal and Installation
(Page 1D-37)”.
Cam Chain Tensioner Inspection
B817H21406026
Inspect the cam chain tensioner in the following
procedures:
1) Separate the crankcases, upper and lower. Refer to
“Engine Bottom Side Disassembly (Page 1D-51)”.
2) Remove the crankshaft assembly from the upper
crankcase. Refer to “Engine Bottom Side
Disassembly (Page 1D-51)”.
3) Remove the dampers (1) of the cam chain tensioner
and cam chain tensioner (2).
1
I718H1140091-01
1
I718H1140092-01
2
I717H1140104-01
I718H1140095-01
1
2
I718H1140096-01

Suzuki GSX650F Specifications

General

Brand	Suzuki
Model	GSX650F
Category	Motorcycle
Language	English