EasyManuals Logo
Home>Suzuki>Motorcycle>GSX650F

Suzuki GSX650F User Manual

Suzuki GSX650F
697 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #259 background imageLoading...
Page #259 background image
Engine Mechanical: 1D-47
Apply engine oil to O-ring and install the oil jet.
Tighten the ECT sensor to the specified torque.
CAUTION
!
Replace the O-ring (1) and gasket (2) with
new ones.
Tightening torque
ECT sensor (b): 18 N·m (1.8 kgf-m, 13.0 lbf-ft)
Cylinder Inspection
B817H21406032
Refer to “Engine Top Side Disassembly (Page 1D-24)”.
Refer to “Engine Top Side Assembly (Page 1D-26)”.
Cylinder Distortion
Check the gasket surface of the cylinder for distortion.
Use a straightedge and thickness gauge. Take clearance
readings at several places. If any reading exceeds the
service limit, replace the cylinder.
Special tool
: 09900–20803 (Thickness gauge)
Cylinder distortion
Service limit: 0.20 mm (0.008 in)
Cylinder Bore
Measure the cylinder bore diameter at six places. If any
one of the measurements exceed the limit, overhaul the
cylinder and replace the piston with an oversize piston.
The remaining cylinders must also be rebored
accordingly; otherwise, the imbalance might cause
excessive vibration.
Special tool
(A): 09900–20530 (Cylinder gauge set)
Cylinder bore
Standard: 65.500 – 65.515 mm (2.5787 – 2.5793 in)
Piston-to-cylinder Clearance
Refer to “Piston and Piston Ring Inspection (Page 1D-
49)”.
1
2
(b)
I717H1140118-01
I717H1140119-01
(A)
I717H1140120-01
I718H1140141-01

Table of Contents

Other manuals for Suzuki GSX650F

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Suzuki GSX650F and is the answer not in the manual?

Suzuki GSX650F Specifications

General IconGeneral
BrandSuzuki
ModelGSX650F
CategoryMotorcycle
LanguageEnglish

Related product manuals