Engine Cooling System: 1F-17
Impeller / Shaft
Visually inspect the impeller and its shaft for damage.
Replace the impeller or shaft if necessary.
Impeller Shaft Journal
Visually inspect the journal for damage or scratch.
Replace the water pump body if necessary.
Specifications
Service Data
B817H21607001
Thermostat + Radiator + Fan + Coolant
I718H1160015-01 I718H1160027-01
Item Specification Note
Thermostat valve opening temperature Approx. 82 °C (180 °F) —
Thermostat valve it 8 mm (0.31 in) and over at 95 °C (203 °F) —
ECT sensor resistance
20 °C
(68 °F)
Approx. 2.45 kΩ —
50 °C
(122 °F)
Approx. 0.811 kΩ —
80 °C
(176 °F)
Approx. 0.318 kΩ —
110 °C
(230 °F)
Approx. 0.142 kΩ —
Radiator cap valve opening pressure
93 – 123 kPa
(0.93 – 1.23 kgf/cm
2
, 13.2 – 17.5 psi)
—
Cooling fan operating temperature
OFF→ON Approx. 105 °C (221 °F) —
ON→OFF Approx. 100 °C (212 °F) —
Engine coolant type
Use an antifreeze/coolant compatible with aluminum
radiator, mixed with distilled water only, at the ratio of 50:50.
—
Engine coolant
Reserve tank
side
Approx. 250 ml
(0.3/0.2 US/lmp qt)
—
Engine side
Approx. 2 750 ml
(2.9/2.4 US/lmp qt)
—
To Next Page
Loading...
Need help?
General
