To Next Page

To Previous Page

Front Suspension: 2B-3

4) Tighten the front fork lower clamp bolts (1).

Tightening torque

Front fork lower clamp bolt (b): 23 N·m (2.3 kgf-

m, 16.5 lbf-ft)

5) Tighten the front fork upper fork clamp bolt (3).

Tightening torque

Front fork upper clamp bolt (c): 23 N·m (2.3 kgf-

m, 16.5 lbf-ft)

6) Set the front fender plate nut to the front fender.

NOTE

Face the triangle mark on the front fender

brace to the front side “A”.

7) Remount the front fender along with the fender plate

nut.

8) Install the front wheel assembly. Refer to “Front

Wheel Assembly Removal and Installation (GSF650/

S/U/SUK7) in Section 2D (Page 2D-4)”.

NOTE

Before tightening the front axle and front axle

pinch bolts, move the front fork up and down

four or five times.

WARNING

After remounting the brake caliper, pump the

brake lever until the pistons push the pads

correctly.

Front Fork Disassembly and Assembly

B817H22206003

Refer to “Front Fork Removal and Installation (Page 2B-

2)”.

Disassembly

1) Remove the front fork protector (1).

(b)

I717H1220006-01

(c)

I717H1220007-01

“A”

I718H1220010-02

I717H1220009-01

I717H1220010-01

Suzuki GSX650F User Manual

Other manuals for Suzuki GSX650F