EasyManuals Logo
Home>Suzuki>Motorcycle>GSX650F

Suzuki GSX650F User Manual

Suzuki GSX650F
697 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #299 background imageLoading...
Page #299 background image
Engine Lubrication System: 1E-6
Install the oil pressure regulator (1) and oil strainer (2).
NOTE
When installing the oil strainer, fit the
concave part “A” of the oil strainer onto the
convex part “B” of the crankcase.
Apply BOND to the mating surface of the oil pan.
NOTE
Use of BOND is as follows:
Make surfaces free from moisture, oil, dust
and other foreign materials.
Apply to distorted surfaces as it forms a
comparatively thick film.
: Sealant 99000–31110 (SUZUKI BOND
No.1215 or equivalent)
Tighten the oil pan bolts diagonally.
NOTE
Fit a new gasket washer to the oil pan bolt (3).
CAUTION
!
Use a new gasket washer to prevent oil
leakage.
After installing the removed parts, pour engine oil and
engine coolant. Refer to “Engine Oil and Filter
Replacement in Section 0B (Page 0B-12)” and
“Cooling System Inspection in Section 0B (Page 0B-
14)”.
Oil Pressure Regulator / Oil Strainer Inspection
B817H21506004
Refer to “Oil Pan / Oil Strainer / Oil Pressure Regulator
Removal and Installation (Page 1E-4)”.
Oil pressure regulator
Inspect the operation of the oil pressure regulator by
pushing on the piston with a proper bar.
If the piston does not operate, replace the oil pressure
regulator with a new one.
1
2
“A”
“B”
I718H1150029-01
I718H1140228-01
3
I717H1150010-01
I718H1150033-01

Table of Contents

Other manuals for Suzuki GSX650F

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Suzuki GSX650F and is the answer not in the manual?

Suzuki GSX650F Specifications

General IconGeneral
BrandSuzuki
ModelGSX650F
CategoryMotorcycle
LanguageEnglish

Related product manuals