EasyManuals Logo

Suzuki VZR1800 2007 User Manual

Suzuki VZR1800 2007
609 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #106 background imageLoading...
Page #106 background image
ENGINE 3-49
REASSEMBLY
• Apply engine oil to the sliding surfaces of the oil pump inner
rotor, outer rotor and shaft.
• When installing the inner rotor 1, align the pin 2 with the
groove 3.
• When installing the inner rotor and outer rotor, face the
punched marks A on the rotors to the outside.
INSTALLATION
• Before mounting the oil pump, apply engine oil to the sliding
surfaces of the outer rotor, inner rotor, and shaft.
• Tighten the oil pump mounting bolts.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Suzuki VZR1800 2007 and is the answer not in the manual?

Suzuki VZR1800 2007 Specifications

General IconGeneral
Displacement1783 cc
Bore x Stroke112.0 mm x 90.5 mm
Compression Ratio10.5:1
Fuel SystemFuel injection
IgnitionElectronic ignition (transistorized)
Final DriveShaft drive
Front SuspensionInverted telescopic, coil spring, oil damped
Rear SuspensionLink type, coil spring, oil damped
Front BrakesDual hydraulic disc
Rear BrakesSingle hydraulic disc
Engine Type4-stroke, liquid-cooled, DOHC, 54-degree V-twin
Transmission5-speed
Front Tire130/70R18M/C 63H
Overall Height1185 mm
Seat Height705 mm
Torque160 Nm @ 3200 rpm
Ground Clearance140mm
Overall Length2485 mm (97.8 in)
Power125 hp (93 kW) @ 6200 rpm

Related product manuals