CHASSIS 9-71
• Remove the push rod 8, piston/primary cup 9 and spring 0.
MASTER CYLINDER INSPECTION
CYLINDER, PISTON
• Inspect the cylinder bore wall for any scratches or other dam-
age.
CUP SET
• Inspect the cup set.
MASTER CYLINDER REASSEMBLY
Reassemble the master cylinder in the reverse order of disas-
sembly. Pay attention to the following points:
$
- Specification and classification: DOT 4
* Clean the master cylinder components with fresh
brake fluid before reassembly. Never use cleaning
solvent or gasoline to clean them.
* Do not wipe the components with a rag.
* Apply brake fluid to the cylinder bore and all the
component to be inserted into the bore.
To Next Page
Loading...
Need help?
General
