11-40 SERVICING INFORMATION
REAR BRAKE HOSE ROUTING
1 Stopper A Face the white paint on reservoir hose to forward.
2 Reservoir B
Tighten the hose guide bolt after positioning the stopper of
hose guide to the swingarm.
3 Brake cylinder C Fix the grommet of brake hose to the hose guide.
4 Brake hose D Fix the brake hose to the clamp.
5 Brake caliper E Master cylinder cover
6 Clamp F Reservoir hose
7 Face the tip of clamp to backward. G Pass the reservoir hose inside of the master cylinder cover.
8 Face the tip of clamp to upper. H Do not contact the hose and muffler.
9 Starter motor lead wire I
Tighten the brake hose union bolt to the specified torque
after touching the brake hose union to the stopper.
0
Insert the reservoir hose fully to the
reservoir and brake master cylinder.
30Ëš
14Ëš
To Next Page
Loading...
Need help?
General
