6-10 FUEL SYSTEM AND THROTTLE BODY
FUEL MESH FILTER INSPECTION
• Disconnect the clamp 1 and rubber boot 2.
If the fuel mesh filter is clogged with sediment or rust, replace
the fuel filter with a new one.
FUEL PUMP AND FUEL LEVEL GAUGE
REASSEMBLY AND INSTALLATION
Install the fuel pump and fuel level gauge in the reverse order of
removal and disassembly. Pay attention to the following points:
• Apply thin coat of engine oil to the new bushing and install if to
the fuel joint pipe.
"
• Install the new O-ring to the pressure regulator.
• Apply thin coat of the engine oil to the new O-ring.
"
• Install the new O-ring to the fuel pipe.
• Apply thin coat of the engine oil to the new O-ring.
"
Use the new bushing to prevent fuel leakage.
Use the new O-ring to prevent fuel leakage.
Use the new O-ring to prevent fuel leakage.
To Next Page
Loading...
Need help?
General
