4-2 DRIVELINE/AXLE
SECONDARY BEVEL GEARS
CONSTRUCTION
!
1 Driven bevel gear coupling 8 Shims E Driven bevel gear bearing
2 Oil seal 9 O-ring A Driven bevel gear coupling nut
3 Oil seal housing 0 Secondary gear case B Secondary driven bearing stopper
4 Bearing housing set A Output cam dog C Secondary driven bearing housing bolt
5 O-ring B Damper spring D Secondary drive gear bolt
6 Shims C Spring cam stopper E Secondary driven gear case bolt
7 Secondary bevel gear set D Driven bevel gear shaft
ITEM N·m kgf-m lb-ft ITEM N·m kgf-m lb-ft ITEM N·m kgf-m lb-ft
A 95 9.5 68.5 C 28 2.8 20.0 E 26 2.6 19.0
B 105 10.5 76.0 D 145 14.5 105.0
To Next Page
Loading...
Need help?
General
