ISC VALVE RESET (For VZR1800K8/ZK8)
When removing or replacing the throttle body assembly, reset
the ISC valve learned value in the following procedures:
1) Turn the ignition switch to the ON position.
2) Set up the SDS tools.
! A 09904-41010: SDS set
99565-01010-014: CD-ROM Ver. 14
3) Click “Active control”.
4) Click “ISC learned value reset” 1.
5) Click “Reset” button 2 to clear the ISC learned value.
NOTE:
The learned value of the ISC valve is set at RESET position.
6) Close the SDS tool.
7) Turn the ignition switch to the OFF position.
NOTE:
The ISC valve opening initialization is automatically started after
the ignition switch is turned OFF.
Yes
No
14- VZR1800 ('08-MODEL)18
To Next Page
Loading...
Need help?
General
