8-6 COOLING AND LUBRICATION SYSTEM
RADIATOR INSPECTION AND CLEANING
• Road dirt or trash stuck on the fins must be removed.
• Use of compressed air is recommended for this cleaning.
• Fins bent down or dented can be repaired by straightening
them with the blade of a small screwdriver.
RADIATOR REASSEMBLY
Reassemble the radiator in the reverse order of disassembly.
Pay attention to the following points:
• Install the radiator guard 1.
NOTE:
Fit the radiator onto the concave part A of the radiator guard.
RADIATOR INSTALLATION
• Install the radiator.
• Route the radiator hoses. (#11-42)
• Bleed air from the cooling circuit. (#2-21)
To Next Page
Loading...
Need help?
General
