Suzuki VZR1800 2007 User Manual

6-20 FUEL SYSTEM AND THROTTLE BODY
• Apply thin coat of the engine oil to the new cushion seal 3,
and the O-ring 4.
"
• Install the fuel injector 5 by pushing it straight to the delivery
pipe 6.
NOTE:
Align the coupler E of injector with boss F of the delivery pipe.
"
• Install the fuel delivery pipes and hose assembly 7 to the
throttle body assembly.
"
• Tighten the fuel delivery pipe mounting screws to the speci-
fied torque.
( Fuel delivery pipe mounting screw:
5 N·m (0.5 kgf-m, 3.5 lb-ft)
Replace the cushion seal and O-ring with the new
ones.
Never turn the injector while pushing it.
Never turn the fuel injectors while installing them.

Suzuki VZR1800 2007 Specifications

General

Displacement	1783 cc
Bore x Stroke	112.0 mm x 90.5 mm
Compression Ratio	10.5:1
Fuel System	Fuel injection
Ignition	Electronic ignition (transistorized)
Final Drive	Shaft drive
Front Suspension	Inverted telescopic, coil spring, oil damped
Rear Suspension	Link type, coil spring, oil damped
Front Brakes	Dual hydraulic disc
Rear Brakes	Single hydraulic disc
Engine Type	4-stroke, liquid-cooled, DOHC, 54-degree V-twin
Transmission	5-speed
Front Tire	130/70R18M/C 63H
Overall Height	1185 mm
Seat Height	705 mm
Torque	160 Nm @ 3200 rpm
Ground Clearance	140mm
Overall Length	2485 mm (97.8 in)
Power	125 hp (93 kW) @ 6200 rpm