Suzuki VZR1800 2007 User Manual

CHASSIS 9-47
CUSHION ROD BEARING
• Install the bearings into the cushion rod with the special tool.
% 09913-70210: Bearing installer set (35 mm)
• Press the bearing at 1.0 mm (0.04 in) depth from the cushion
rod edge. (!9-46)
CUSHION LEVER BEARING
• Press the cushion lever upper bearings into the cushion lever
with the special tool and suitable size socket wrench 1.
% 09924-84521: Bearing installer set
NOTE:
* When installing the bearing, stamped mark on the bearing
must face outside.
* Press the bushing at 4.5 mm (0.17 in) depth from the cushion
lever edge. (!9-46)
• Press the cushion lever lower bearings with the special tool.
% 09924-84521: Bearing installer set
NOTE:
* When installing the bearing, stamped mark on the bearing
must face outside.
* Press the bushing at 1.0 mm (0.04 in) depth from the cushion
lever edge. (!9-46)
• Install the dust seals into the cushion lever with the special
tool.
% 09913-70210: Bearing installer set (35 mm)
NOTE:
Apply SUZUKI SUPER GREASE “A” to the dust seals.
' 99000-25010: SUZUKI SUPER GREASE “A”
or equivalent
SWINGARM BEARING
• Press the swingarm pivot bearings into the frame with the
special tool.
% 09941-34513: Steering race installer
NOTE:
When installing the bearing, stamped mark on the bearing must
face outside.

Suzuki VZR1800 2007 Specifications

General

Displacement	1783 cc
Bore x Stroke	112.0 mm x 90.5 mm
Compression Ratio	10.5:1
Fuel System	Fuel injection
Ignition	Electronic ignition (transistorized)
Final Drive	Shaft drive
Front Suspension	Inverted telescopic, coil spring, oil damped
Rear Suspension	Link type, coil spring, oil damped
Front Brakes	Dual hydraulic disc
Rear Brakes	Single hydraulic disc
Engine Type	4-stroke, liquid-cooled, DOHC, 54-degree V-twin
Transmission	5-speed
Front Tire	130/70R18M/C 63H
Overall Height	1185 mm
Seat Height	705 mm
Torque	160 Nm @ 3200 rpm
Ground Clearance	140mm
Overall Length	2485 mm (97.8 in)
Power	125 hp (93 kW) @ 6200 rpm