Takeuchi TB1160W User Manual

2-51
CONTROLS
Use the travel select button to change the
travel direction (forward or reverse).
Refer to “Travel select button” on page 2-43.
TRAVEL PEDAL
• Check the position of the undercarriage
(steering device) before traveling.
Before operating the travel pedal, make
sure that the steering device is to the
front of the operator’s seat. Remember
that when the steering device is to the
rear of the operator’s seat, the steering
wheel must be operated in the reverse
direction from when it is to the front.
• Before traveling in reverse, check that
the area in the rear is clear of any
person.
Use this pedal to drive the machine and to
control the travel speed.
This pedal can also be used to control the
engine RPM if the travel pedal button has
been pressed to enter the foot accelerator
mode.
F .........Forward travel
R ........Reverse travel
LEVERS AND PEDALS
SECOND BOOM PEDAL (2-PIECE BOOM)
Use this pedal to operate the second boom.
(A) .......Second boom raise
(B) ......Second boom lower
Refer to “Operating the second boom” on
page 3-18.

Takeuchi TB1160W Specifications

General

Brand	Takeuchi
Model	TB1160W
Category	Excavators
Language	English