5-25
MAINTENANCE
LUBRICATING THE WORKING EQUIPMENT
• Before performing maintenance on top of the work bench, clean the footing and
observe the following precautions to prevent falling.
· Do not spill oil or grease.
· Do not leave tools scattered around.
· Watch your step when walking.
• Never jump down from the machine or the work bench. When getting on or off the
machine or work bench, use the steps, handrails or work bench to support your body.
Your weight should be evenly distributed among the three contact points (one hand
and two feet or two hands and one foot).
• Do not stand on the dozer blade and perform maintenance work. Doing so is
dangerous because of the unsteady foothold. Use the work bench.
1. Keep the machine configuration as shown in the diagram above, lower the working
equipment to the ground, and then stop the engine.
2. Use the grease gun to lubricate the grease fittings.
3. Wipe off the excess grease.
DAILY INSPECTION (EVERY 10 HOURS)
To Next Page
Loading...
Need help?
General
