2-4
CONTROLS
COVERS
STARTER KEY
COVERS
The starter key is used to start and stop the
engine, as well as to lock and unlock the
following components:
• Fuel filler cap
• Cab door
• Covers
FRONT COVER (TOOL BOX)
• Never jump down from the machine.
Use the steps and handrails when
climbing up and down the machine, and
always support your body at three
points with your hands and feet.
• When opening the front cover, open it
all the way to the position where it is
securely stopped.
• When opening or closing the front
cover, be careful not to get your hands
or other parts of your body caught by
the cover.
The grease gun and tools are stored under
the cover.
Opening
1. Insert the starter key and turn it
counterclockwise to unlock the front cover
(1).
2. Open the front cover (1) until it stops.
Closing
1. Support the front cover (1) by hand and
release the stay (2).
2. Close the front cover (1).
3. Insert the starter key and turn it clockwise
to lock the front cover (1).
To Next Page
Loading...
Need help?
General
