2-15
CONTROLS
SEAT AND SEAT BELT
SEAT BELT
Be sure to fasten the seat belt securely
before starting the engine.
Fastening the seat belt
1. Adjust the seat to the desired position for
operation, sit up and sit back in the chair.
2. Pull the seat belt to the desired length.
B
A
3. Make sure that the belt is not twisted and
then insert the tongue plate (A) into the
buckle (B) of the seat belt until you hear a
clicking sound as it locks in place.
4. Check if the belt is securely locked by
pulling it, and arrange the belt around your
waist.
Releasing the seat belt
AG7B024
A
C
B
1. Grasp the tongue plate (A) and press the
button (C) on the buckle (B).
The seat belt retracts back into its original
position.
To Next Page
Loading...
Need help?
General
