6-10
TROUBLESHOOTING
IF A WARNING LAMP FLASHES
If an alarm is sounded or a warning lamp starts flashing during operation, park the machine in
a safe place and perform the remedy procedures described below.
Warning lamp Lamp name Causes and remedies
Vehicle and
engine
emergency
lamp
There is a problem in the machine.
Refer to the respective warning lamp below.
Get the vehicle or engine error code number from the
multi-data display and consult your sales or service
dealer referring to the number on the “Vehicle error code
list” or “Engine error code list”.
Refer to “Vehicle error code list” on page 6-12.
Refer to “Engine error code list” on page 6-14.
Battery charge
warning lamp
There is a problem with the fan belt or charger.
Check
thefanbeltforslackorbreakageandadjustas
necessary.
If the lamp continues flashing after maintenance, there is
likely a problem with the charger. Consult your sales or
service dealer for help.
Referto“Inspectingandadjustingthefanbelt”onpage
5-24.
Engine oil
pressure
warning lamp
There is a problem in the engine lubrication system.
Check the engine oil level. If the lamp is flashing when
the level is normal or even after replenishment of oil or
coolant, consult your sales or service dealer.
Refer to “Inspecting and replenishing the engine oil” on
page 5-17.
Coolant
temperature
warning lamp
The coolant temperature is too high and the engine is
overheating.
Refer to “If the engine overheats” on page 6-3.
IF A WARNING LAMP FLASHES
To Next Page
Loading...
Need help?
General
