Takeuchi TB285 User Manual

2-17
CONTROLS
INDICATORS
9. Glow lamp
This lamp goes out when the engine
preheating is completed.
10. Travel speed lamp
This lamp turns on when the travel speed
button is set to the 2nd (high) speed.
11. Deceleration lamp
This lamp turns on when the deceleration
button is pressed. It flashes when the
auto-deceleration switch is pressed and
changes to the “lit” state when the
system enters the deceleration mode.
While in the “lit” state, it indicates that the
engine is in the deceleration mode at low
idling speed (1100 rpm).
12. ECO mode indicator lamp
This lamp turns on when the ECO mode
switch is turned on. In the ECO mode,
the machine drives with reduced engine
RPM for lower fuel consumption.
13. Auxiliary 1st flow rate indicator lamp
This lamp lights up to indicate which flow
rate setting is selected in the auxiliary
1st.
1 ....... Flow rate setting 1
2 ....... Flow rate setting 2
3 ....... Flow rate setting 3
METERS
14. Water temperature gauge
Indicates the temperature of the engine
coolant water.
 TheLEDshouldbewithinthegreen
range during machine operation.
The red range indicates overheating.
15. Fuel Gauge
Indicates the amount of fuel in the tank.
Be sure to top off the tank before running
out of fuel.
INSTRUMENT CLUSTER

Takeuchi TB285 Specifications

General

Brand	Takeuchi
Model	TB285
Category	Excavators
Language	English